© All rights reserved to Aitech 2024
C108 | 6U VME SBC
PowerPC® 7448 Processor
The C108 is designed for harsh environment applications that require high performance, low power, and multiple I/O capabilities. This powerful single-board computer combines an enhanced processing engine with versatile and flexible I/O. Powered by NXP’s PowerPC® MPC7448 microprocessor at 1.4 GHz with integrated on-chip L1 and L2 caches, the C108 provides excellent processing capability while consuming minimum power and generating a low level of heat.
The large, fast SDRAM array is supplemented by additional memory arrays, such as Flash for user application storage, high-density NAND Flash for mass storage purposes, USB Solid State Disk (SSD), and NVRAM for user/application-specific parameter storage.
The C108 is a supported phase product, to be used in active programs only. For new designs, see the C111 and C114 for other PowerPC® 6U VME SBCs. Learn more about our COTS Lifecycle+® obsolescence management program.
- Rugged 6U VME Single-Slot SBC
- VME64x Compliant
- PowerPC® 7448 @ 1.4 GHz, 1.0 GHz, or 600 MHz, with AltiVec™ Technology
- 32 kB L1 and 1 MB L2 Caches
- Up to 1 GB of SDRAM with ECC
- 32 MB Boot Flash Memory
- 128MB User Flash Memory
- Up to 32GB NAND Flash Memory
- Up to 8GB USB SSD (Solid State Disk)
- 128kB NVRAM
- 1 Gigabit Ethernet Port
- 2 Fast Ethernet Ports
- 2 USB 2.0 Ports
- 2 Dual-Redundant MIL-STD-1553B Ports
- Opto-Isolated CAN Bus 2.0B Interface
- 2 Standard UART Ports Supporting RS-232/422/485
- 6 Multi-Protocol High-Speed Serial Ports Supporting RS-232/422/485
- 16 Single-Ended TTL or 8 Differential RS-422 Discrete I/O Lines
- 2 PMC Slots
- Power Saving Modes
- Eight 32-Bit Timers
- 2 Watchdog Timers
- Electronic Elapsed Time Meter
- Real-Time Clock
- 8 High Performance DMA Engines
- 3 On-Board Temperature Sensors
- Pin-Compatible with C100, C101, and C103 SBCs
- Conduction- and Air-Cooled Versions
- RTOS Support: VxWorks®, INTEGRITY®
Related Products
Related products
-
C114 | 6U VME SBC
The C114 SBC brings the powerful QorIQ T1042, or higher performance T2081, multi-core processor to embedded systems, significantly increasing previous generation computing capabilities.
-
C111 | 6U VME SBC
The C111, featuring the the T4080 processor, significantly enhances computing performance and optimizes energy efficiency for lower power, high-end, floating point computing applications.
-
C877 | 3U VPX SBC
The C877 is designed with a modern, high-bandwidth bus architecture and a versatile assortment of on-board I/O interfaces, with an XMC site for additional I/O options.