© All rights reserved to Aitech 2024
M622 | XMC Managed Ethernet Switch/Router
Dual-Core ARMv7 Processor @1.6 GHz
The M622 is a fully managed 10GbE/40GbE Ethernet switch/router on an XMC. It is designed for embedded and harsh environment applications with SWaP-C optimization in mind. The M622 is based on an advanced and flexible Layer2/Layer3 (L2/L3) Ethernet switch and packet processor offering up to 320 Gbps of full wire-speed bandwidth. The XMC form factor provides 10/40 GbE internal connectivity within any OpenVPX or SOSA aligned system, between modern SBCs and other processing and I/O boards, while enhancing SWaP-C throughout the system.
With much more functionality in terms of networking bandwidth, networking features and protocols than other Ethernet switches on XMC form factors, the M622 is a gamechanger for current and future military and aerospace platforms that utilize high resolution sensors and cameras that process large amounts of data using onboard AI systems and mission computers.
- Rugged Fully Managed Ethernet Switch/Router XMC
- Compliant with VITA 61 (10 Gbps) and VITA 42 (1 Gbps)
- Flexible Port Configurations
- Up to 4x 40GBaseKR4
- Up to 18x 10GBaseKR
- Up to 18x 1000BaseKX
- Full Wire-speed Non-blocking Forwarding
- Fast Boot Mode
- Jumbo Frames Support (10 kB)
- L2 and L3 Networking Protocols
- 1Q-based VLAN Support
- Dual-Stack IPv4/IPv6 Routing
- Unicast and Multicast Routing Support
- Advanced QoS with IPv4/IPv6 Diffserv
- Redundancy and Resiliency Protocols
- Access Lists and Port-level Security
- Secure Web & CLI Management Access
- 1588v2 (PTP) Transparent Clock Support
- Hardware Monitoring
- Power Monitor
- Elapsed Time Recorder
- Temperature Sensor
- Real-Time Clock
- Conduction and Air-Cooled Versions
- Vibration and Shock Resistant
TFM622-SK-A Starter Kit for Air-cooled M622
Includes testing fixture, front panel maintenance break-out cable for air-cooled XMC with console (D-sub 9-pin) and OOB Ethernet (RJ45) ports, and AC power supply
TFM622-SK-R M622 Starter Kit for Conduction-cooled M622
Includes testing fixture, maintenance break-out cable with console (D-sub 9-pin) and OOB Ethernet (RJ45) ports, and AC power supply
TCM622-MNT-A Breakout Cable for Air-cooled M622
Front panel maintenance break-out cable with console (D-sub 9-pin) and OOB Ethernet (RJ45) ports
TCM622-MNT-R Break-out Cable for Conduction-cooled M622
Maintenance break-out cable with console (D-sub 9-pin) and OOB Ethernet (RJ45) ports
Related Products
Related products
-
C111 | 6U VME SBC
The C111, featuring the the T4080 processor, significantly enhances computing performance and optimizes energy efficiency for lower power, high-end, floating point computing applications.
-
CM900 | PMC Carrier Expansion Card
The CM900 PMC Carrier Expansion Card provides an additional active interface between the CompactPCI backplane and a PMC, for each available CompactPCI slot.
-
C163 | 6U VME SBC
Aitech’s C163 is a high-performance 6U VME SBC for embedded and harsh environment applications.