M453 | Analog I/O PMC
The M453 Analog I/O PMC board is designed to provide analog output and analog input on a cost effective and small industrial standard PMC form factor. The M453 provides a host processor card that has industrial standard PMC slots with multiple high resolution, 16-bit analog input and 12-bit analog output channel interfaces.
The analog I/O PMC interface supports 50 external analog input channels and 8 analog output channels, while the onboard memory provides 128 x 16-bit buffers for each input channel. The analog input channels are converted in series with a programmable conversion time from 10 to 46 microseconds for each channel, with a total conversion time from 700 microseconds to 2 milliseconds for all channels. Users can program a port conversion list if less than all 50 channels are used.
- 50 Analog Input Channels
- 16-bit A/D Conversions at 100Ksps
- 12 Differential or 24 Single-Ended Analog Input Channels with ±10 V Input Range
- 12 Single-Ended Input Channels with ±15 V Input Range
- Six (6) Single-Ended Input Channels with ±28 V Input Range
- High Gain Input Channels: Four (4) Instrument Amplifier Channels, Gain = 100; or, 8 Single-Ended Channels, Gain = 6.25
- Anti-alias Filters for All Analog Input Channels
- 128 x 16-bit Storage for Each Analog Input Channel
- 12-bit D/A Converter
- Eight (8) Single-Ended Analog Output Channels with ±10 V Output Range
- Redundant BIT Path for All External Analog Inputs Using 12-bit dedicated ADC
- Interrupt Capabilities Using PCI Interrupt Pins
- PCI 2.1 Interface Compliant, 32 bit @ 33 MHz PCI Bus Interface
- One (1) Time Conversion of All Analog Input Initiated by Either Hardware or Software Triggers
- User-configurable port conversion table if less than 50 channels are used
- Air-Cooled Version Compliant with IEEE 1386-2001 Specification
- Conduction-Cooled Version Compliant with ANSI/VITA20-2001
- Three (3) Ruggedization Levels
- Wind River VxWorks Drivers
- BIT (Built-in-Test) Available for Complete Functional Testability
Related Products
Related products
-
C111 | 6U VME SBC
The C111, featuring the the T4080 processor, significantly enhances computing performance and optimizes energy efficiency for lower power, high-end, floating point computing applications.
-
CM900 | PMC Carrier Expansion Card
The CM900 PMC Carrier Expansion Card provides an additional active interface between the CompactPCI backplane and a PMC, for each available CompactPCI slot.
-
TM670 | Transition Module
Aitech’s TM670 transition module is designed as a supplement to the C670 6U VPX Switch, and intended for use in commercial air-cooled enclosures.