
U-P2330 | SOSA™ aligned Power Supply Board
The U-P2330 is a high-efficiency power supply solution for modern integrated embedded rugged systems aligned with The Open Group Sensor Open Systems Architecture™ (SOSA) Technical Standard 1.0. In addition to offering an output of up to 600W, the power supply card (PSC) can incorporate an optional sharing mechanism, per VITA 62, that enables two of the power supplies to be operated in parallel and provide redundant operation with a maximum power output of up to 1200 W.
An optional holdup capacitor bank provides the ability to shut down the system in an orderly fashion, in the event of power outage and the power supply redundancy protection ensures high power supply resiliency. The wide variety of isolation and protection mechanisms, including MIL-STD-704 & MIL-STD-1275 compliance, integrated into the U-P2330 further improve power feed resiliency and power stability.
- 3U Conduction-Cooled 2LM Form Factor
- Aligned to SOSA Technical Standard Edition 1.0
- VITA 62 Compliant
- Up to 600 W Output Power
- 88% Typical Efficiency
- Wide Input Range
- EMI/RFI Input Filter
- Two SOSA Standard Output Supplies
- +12 V and +3.3 V_AUX
- Holdup Capacitor Bank & Backup
- Battery Options
- No Minimum Load Requirement
- Input/Output and Chassis Isolation
- Input Transient Protection per MIL-STD-704 and MIL-STD-1275
- Input Reverse Polarity Protection
- Output Over/Under-Voltage, Short Circuit and Over-Temperature Protection
- No Electrolytic Capacitors (except hold-up option)
- Standard Control Signals
- FAIL# and SYSRESET# Outputs
- ENABLE# and INHIBIT# Inputs (ON/OFF Control)
- IPMI and Internal BIT
2B047-R00-00 Dual slot SOSA aligned backplane with sharing
M1010-00 Fan control unit
M2231-00 Hold-up and battery module to support 704 and VBAT (see ordering information)
Related Products
-
TM162 Transition Module
Aitech’s TM162 transition module is designed as a supplement to the C162/C163 6U Core™ i7 VME SBCs, and intended for use in commercial air-cooled enclosures.
-
U-TM8770 | Transition Module
The U-TM8770 transition module supports the SOSA™ aligned U-C8770 SBC I/O.
-
TM878 | Transition Module
The TM878 transition module supports the C878 SBC.