© All rights reserved to Aitech 2024
C925 | 3U CompactPCI SBC
PowerQUICCIII- MPC8548E
The RTCA-compliant C925 is a low-power, rugged 3U CompactPCI PowerPC-based SBC. The board helps significantly reduce the engineering resources typically diverted to RTCA design requirements, saving on overall system development costs. Developed specifically for avionics, the C925 is fully certifiable to both DO-178 (software) and DO-254 (hardware), making it ideal for safety and mission critical applications, such as flight and mission control computers into FAA-controlled airspace.
In addition to reduced design costs, the C925 saves on DO-254 certification costs by minimizing the use on-board FPGAs. Featuring increased processing power without additional heat generation, the C925 incorporates a highly integrated PowerQUICC III 8548E processor that can be hardware configured to 1.2 GHz with a CPU core complex bus (CCB) speed of 400 MHz for maximum processing power.
- Rugged 3U CompactPCI SBC
- Ideal for DO-178/DO-254 Applications
- PowerQUICC-III MPC8548E @ 800MHz (optional* 666MHz, 1.2 GHz)
- 400 MHz Core Complex Bus (CCB) Speed
- One Standard PMC/XMC Slot
- XMC J5 Optional Configurations*
- 1, 2, 4, 8 Lanes PCI-E
- 1, 2, 4 Lanes PCI-E and 4 Lanes SRIO
- 4 Lanes SRIO
- PICMG 2.0, Rev. 3.0 Compliant
- System Controller or Peripheral (Auto)
- 1GB of DDR2 SDRAM at 400MHz with ECC
- 64 MB Boot Flash Memory
- 128 MB User Flash Memory
- 64 MB User Protected Flash Memory
- 512 KB Autostore NVSRAM with Power Saving Support
- Two 10/100/1000 Mbps Ethernet Ports
- Two USB 2.0 Ports, Two CAN 2.0B Ports
- Two Async RS-232/422/485 Ports
- Eight Single Ended TTL or Four RS-422/485 Differential Discrete I/O Lines
- Four High Performance DMA Engines
- Four Timers (Internal to the CPU)
- Three Watchdog Timers, Elapsed Time Recorder
- Real Time Clock
- Three On-board Temperature Sensors
- VxWorks 6.x RTOS Support
- Conduction and Air-cooled Versions
TM925
Rear transition module providing a convenient standard direct connection to all C925 I/O interfaces.
Related Products
Related products
-
C162 | 6U VME SBC
Aitech’s C162 is a high-performance 6U VME SBC for embedded and harsh environment applications.
-
C877 | 3U VPX SBC
The C877 is designed with a modern, high-bandwidth bus architecture and a versatile assortment of on-board I/O interfaces, with an XMC site for additional I/O options.
-
CM870 | PMC/XMC Carrier Expansion Card
To expand beyond the PMC/XMC sites on 3U VPX SBCs, Aitech has developed the CM870 PMC/XMC Carrier.